Trawler Fenders
Bolt on models are available for fiberglass vessels.
Short trawl fender pads can be welded to deck and just inside rail
to support trawl doors while not in use. Decreases trawl door
damage and deck damage
| Compressed rubber pads and steel bars or rods are totally enclosed with 3/8" steel plate to form an integrated steel box which is welded directly to knee. | Fully integrated weld tabs every 12" allow for quick and easy installation. |
| Part No. | A | B | C | Wt Lbs Per Lineal Ft |
|---|---|---|---|---|
| SR 142 and SR143 |
4" | 4" | 12" to 240" |
10 |
| 4" | 5" | 11 | ||
| 4" | 6" | 14 | ||
| 4" | 8" | 20 | ||
| 4" | 10" | 26 | ||
| 4.5" | 10" | 27 | ||
| 4.5" | 12" | 32 | ||
| 6" | 6" | 23 | ||
| 6" | 10" | 36 | ||
| 6" | 12" | 38 |
Horizontal padds welded to exterior of vessel at door impact areas
Horizontal, vertical, and deck pads welded within door pocket
Horizontal pads welded to stern of processor/catcher with stern draw doors
Fenders: Offshore & Dockside | Scrapers | What's New at Schuyler
Contact Us | Home
